Comply with IEC60529:2013 "Enclosure Protection Level (IPX7)" standard requirements;It is suitable for the protection classification of electrical equipment whose rated voltage does not exceed 72.5kv and which is protected by a enclosure.
1. Scope of use:
It is suitable for the protection classification of electrical equipment whose rated voltage does not exceed 72.5kv and which is protected by a enclosure. It prevents water from entering the enclosure and causing harmful effects to the device.
When the sample is fully immersed in water, the height of the sample should be less than the highest point of the shell of 850mm, and should be 1000mm below the water surface. The test sample duration was 30 min. The difference between the water temperature and the sample temperature is not more than 5K.
2. Compliant standards:
2.1 Comply with IEC 60529:2013 "Enclosure Protection Level (IPX7)" standard requirements;
2.2 Comply with the standard requirements of DIN 14521-1987、NF S61-820-1/IN12010、NF S61-820-2/IN12010 "Lamps Part 1: General Requirements and Tests (IPX7)".
3. Technical requirements:
3.1 Working size: length, width and height are 300*300*1200mm;
3.2 External dimensions: length, width and height are 360*360*1300mm;
3.3 Material: stainless steel, with observation doors and windows, plexiglass, stainless steel is 1.2mm thick;
3.4 Test water depth: 1.2m;
3.5 Manual adjustment of water level;
3.6 Water level display: ruler, the scale is 1.0mm