ul

Comply with ISO 5658-2 standards,It is suitable for testing the surface characteristics of flat single materials, composite materials or components used on exposed surfaces of buildings and transportation vehicles (such as ships, trains, etc.), and tubular products through special installation and fixing.

Burn-Through Test Apparatus Compliant standards:US Federal Aviation Regulations FAR25,suitable for evaluating the burn-through resistance of thermal and acoustic insulation materials under high-intensity open flames.

This Cone Calorimeter Standard：Complies with: GB/T16172, ISO 5660-1 and -2, ASTM E1354, ASTM E 1740, ASTM E1550, ASTM D5485, ASTM D6113, NFPA 271, NFPA 264, CAN ULC 135, BS 476 test standard。

This impact test machine equipment is designed according to the standards of ISO 812, ISO 974.The brittle temperature and low temperature performance of different rubber materials or different formulas can be measured.

The Fire Resistance Test Furnace suitable for the test of thermal insulation performance deviation and thermal insulation performance attenuation of steel structure fire retardant coatings.

Ventilation and Rain Resistance Testing Machine for Building Louvers is an apparatus water penetration resistance of louvers in compliance with AS4740 standards. This system simulates wind-driven rain conditions and measures louver effectiveness in restricting water ingress while maintaining optimal ventilation rates. 

Foam Fire Extinguishing Agent Test Apparatus designed to evaluate the fire-suppression effectiveness, expansion ratio, and drainage characteristics of foam-based fire extinguishing agents. It operates by simulating fire scenarios and quantifying the foam's ability to smother and cool flames, thus assessing its suitability for various fire hazard classes. 

This test applies to the thermal protective performance of single or multilayer materials, used for evaluating the thermal protective materials of personnel exposed to convective and radiant heat hazards. It is not applicable to materials that are non-flame-retardant, or those that melt, drip, or degrade when exposed to high temperatures

A fire propagation apparatus is a device used to measure the rate at which flames spread across the surface of a material. This apparatus is crucial for testing the fire resistance and safety of various materials, particularly those used in construction, textiles, and transportation industries. 

It is suitable for the electrical insulation performance test of fire helmets.

The Testing Machine Comply with UL758 standards,This equipment is used to test the degree of thermal deformation of materials such as plastics and wire rubber.

It is suitable for the impulse shock resistance test of fire emergency lights.

Comply with ISO 7165 and ISO 11601 standard,It is suitable for electrical insulation performance test of water-based fire extinguisher when spraying.

 It is suitable for the electrical insulation performance test of powder extinguishing agent, and the electrical insulation is ≥5kv.

It is suitable for spray gun drop test. Hang the spray gun on the test stand, drop it from a height of 1.5m, and impact it on a 10cm-thick reinforced concrete board. After the test, the spray gun should be free of cracking and deformation and can be used normally.