Load performance test of fire hose reel: fasten the fire hose reel on the impact test frame, the hose reel is in a horizontal position, and use a thin wire rope to hang a weight of 80kg on the wheel of the outer disk wheel. On the edge, after 72 hours of static, do the impact test again to see if it meets the test requirements.
Applicable to sprinkler flow coefficient measurement.This equipment only provides sprinkler test device with nominal flow coefficient less than or equal to 115 as standard;
This Sprinkler System Hydraulic Strength Testing Apparatus Comply with DIN 14521-1987 standards,It is suitable for water pressure sealing test and strength test of sprinkler test.
Cone Calorimeter Comply with ISO 9705,ISO 5660 standards,It is suitable for buildings and large complexes (including rolling stock, vehicles, warehouses and the way they are constructed) as well as for extensive fire performance test verification of raw materials, buildings and solid models.
This NBS Smoke Density Chamber Compliant with BS EN ISO5659-2:2006,ASTM E 662:2006,ISO5659-2:2012 standards,It is suitable for the determination of specific optical density of smoke produced by solid materials or assemblies in flameless mode or flame mode.
It is suitable for fire emergency lighting and evacuation indication systems installed in general industrial and civil buildings, as well as system lights with special performance installed in other environments.
It is suitable for fire coupling, fire water gun sealing performance and water pressure strength test.
This Abrasion Resistance Test Machine It is suitable for wear resistance test of lined fire hose, fire wet hose, etc.;
This Material Smoke Toxicity Hazard Classification Tester Comply with DIN 14521-1987、ISO19700-2006 standards,It is suitable for the test equipment for the grading of smoke toxicity hazard for materials that produce smoke stably.
Toxicity Index (CIT) Test Apparatus with BS EN 50305,EN 45545,DIN 14521 standards, It is suitable for non-metallic material toxicity index test of halogen-free, low-smoke, and low-toxicity wires, cables or optical cables.
This Flammability Testing Equipment Comply with ISO 9772:2001 test standard,It is suitable for evaluating the horizontal combustion performance of foamed plastics small samples under laboratory conditions with a density less than 250kg/M³ measured according to ISO 845-1985 under small flame.
Extruded oversheaths abrasion test apparatus" refers to a testing device used to assess the abrasion resistance of extruded oversheaths, which are protective coverings typically applied to cables or wires. This apparatus is designed to evaluate how well these oversheaths withstand wear and tear
It is suitable for hot air aging tests for fire hose.Compliance with JB/T7444-1994 "Air Heating Test Box" standard.
It can perform tests on national or international standards such as GB, ISO, ASTM, BS, DIN, JIS, etc. It can test the physical properties of various materials, finished products and semi-finished products, and can choose various fixtures for tensile, compressive, tensile, compressive, bending, tearing, peeling, adhesion, shearing and other tests
WhatsApp:
Mobile Phone:
Contact Now
