Select by Industry

The Building Materials Non Combustibility Test Apparatus Comply with ISO1182:2002 test standard.to determine whether the building material is non-flammable under the specified conditions.

Building Material Flammability Test Apparatus Comply with ISO11925-2:2020,suitable for judging whether building materials have flammability test method under specified conditions.

this machine Conform to ASTM D3806 standard Applicable to the determination of flame propagation performance of decorative fire retardant paints.

Fire Retardant Paint Testing Machine(small chamber method) is suitable for testing the fire-retardant performance of fire-resistant paints painted on the surface of combustible substrates under laboratory conditions.

It is suitable for the electrical insulation performance test of fire helmets.

This Crash Test Equipment Comply with IEC 61779: 2003,It is suitable for the collision performance test of combustible gas alarm controller and special fire detector.

This impact test machine equipment is designed according to the standards of ISO 812, ISO 974.The brittle temperature and low temperature performance of different rubber materials or different formulas can be measured.

Salt spray corrosion test apparatus is aimed at the surface treatment of various materials. It contains hardware electroplating, hardware, electronic parts, chemical coatings, baking paint, cars, motorcycles, hardware cleaning tools, screws, springs...

Safety Nets Flame Retardant Tester is suitable for the determination of the combustion performance of various Fabrics Burning Test when the vertical bottom edge is ignited.

When the building partition is subjected to the fire resistance test according to the fire resistance test method specified in ISO 834-1, the water spray impact test shall be additionally carried out as required.

It is suitable for hot air aging tests for fire hose. Compliance with JB/T7444-1994 "Air Heating Test Box" standard.

Thermal Stability Test Apparatus Comply with IEC 60811-3-2: 1985 test standard requirements.It is applicable to the insulation and sheath test of polyvinyl chloride compound for wire and cable.

This Extrusion Test Apparatus Comply with UL758-2016,Suitable for 20AWG~14AWG insulated wire anti-extrusion test.

The Testing Machine Comply with UL758 standards,This equipment is used to test the degree of thermal deformation of materials such as plastics and wire rubber.

Flex Tester Machine Meet the standard requirements of UL 1581. After 15,000 reciprocating movements of the flexible cable used to detect rubber insulation and sheath, that is, 30,000 single-way movements, neither current interruption nor short circuit between conductors should occur.