Single cable vertical combustion tester is currently mainly used to detect the combustion performance of rubber and plastic, or film under a certain fire source, to judge the fire resistance grade of relevant materials. Single cable vertical combustion tester can not only be used in lighting equipment, but also can detect instruments, tools, electrical appliances, motors, low-voltage appliances, or electrical connectors and other electrical and electronic engineering, or rubber products and their related components in the research, quality inspection, production department. In addition, single cable vertical combustion tester can also be applied to engineering plastics, insulation materials, fire sealing materials, or other solid combustible materials related industries, next xiaobian will tell you more about the single cable vertical combustion tester related knowledge and its operation method.
When using a single cable vertical burning test instrument, calibration of the test flame is testing a foundation, with the flame will be able to guarantee the existence of test reliability and stability, the height of the flames in the test request in about 20 mm, outside the yellow flame and flame height is 125 mm, inside the blue flames of 40 mm in height. In the use of flame heating copper block, copper block from 100 degrees Celsius to 700 degrees Celsius, the time needed is about 44 seconds, and the temperature of the test flame if you want to be higher, in about 54 seconds, the general use of flame to carry out. Thus accurate use of flame heating calibration, copper block calibration work flame heating time requirements, copper block can rise from 100 degrees to 700 degrees, the time is 44 seconds, and 500 watts of flame time is 54 seconds, touch screen control system can adjust the relevant parameters, used to directly transfer test standards for testing.
The single-cable vertical combustion tester, which contains a light and a wide window of the position and mode of sample inside, can be arranged freely in an open area, the furnace can be adjusted to three different angles, one of which can be used to emit combustion gas, is an emission device. In the single cable horizontal vertical combustion test instrument, the indoor space is greater than 0.75 cubic meters, bracket adjustment is 26 mm, bracket level adjustment is 70 mm, the internal diameter of the burner is 9.5 mm, the flame time can be adjusted to 0~999.9 seconds, can control its stop time by recording, The temperature range can reach 1000℃.
The single-cable vertical combustion tester is controlled by a touch screen and includes a smart keyboard to write standard applications, while the temperature display control unit can be used for calibration, the timing function can record time, and the flow meter can read the value of the gas flow directly.
WhatsApp:
Mobile Phone:
Contact Now
