HomeFaq Technology Center

2024-04-09

TB 117 Flame Retardant Test of Upholstered Furniture Materials-California, USA

TB 117 Flame Retardant Test of Upholstered Furniture Materials-California, USA

TB 117 Flame retardant test of upholstered furniture materials in California, USA
TB 117: Flame retardant testing of elastic filling materials for upholstered furniture - Requirements, test procedures and instruments
State of California, Department of Consumer Affairs Bureau of Home Furnishing and Thermal Insulation, Technical Bulletin 117(TB 117):Requirements, Test Procedure and Apparatus for Testing the Flame Retardance of Resilient Filling Materials Used in Upholstered Furniture
 
TB 117 standard overview:
1. This standard has been in use for 30 years. Since this standard has great practical value, it is ready to be promoted throughout the United States after completing some supplements.
2. TB117 is formulated based on reality after fully studying the causes of fires, and is more scientific. The test fire sources are cigarette burning test, imitating match ignition test and imitating a certain amount of newspaper ignition test, which are consistent with the actual foam fire scene.
3. As the export volume of furniture products increases, the adoption of this standard can avoid technical trade barriers caused by different technical regulations.
 
TB 117 scope of application:
Resilient filling materials for upholstered furniture specified in accordance with California TB117 standards.
 
TB 117 standard analysis:
1. Elastic filling material cigarette test:
The char size of each sample should be close to 0.1 inches
2. Smoldering test of elastic filling materials
Test 3 samples per foam
If all samples have more than 80% non-smoldering residue
pass
If 2 or more test specimens have less than 80% non-smoldering residue
Fail
If a test sample has less than 80% non-smoldering residue
Add 3 more samples to test
If a test sample has less than 80% non-smoldering residue
Fail
If all test samples have more than 80% non-smoldering residue
pass


TB 117 Test Standard- Material Application Scope

- Elastic porous materials

- Bits and pieces of elastic filling material

- Expanded polystyrene pellets

- No artificial filling materials

- Bits and pieces of loose filling material/feathers and down

- Man-made fiber filling material

Previous: BS 7177 Code for fire protection of cushions, sofas and mattresses

Next: NFPA 260 Cigarette Ignition Resistance Test of Upholstered Furniture Components

Home

Product

Phone

About Us

Inquiry