Test Machine

this machine Conform to ASTM D3806 standard Applicable to the determination of flame propagation performance of decorative fire retardant paints.

This Crash Test Equipment Comply with IEC 61779: 2003,It is suitable for the collision performance test of combustible gas alarm controller and special fire detector.

This impact test machine equipment is designed according to the standards of ISO 812, ISO 974.The brittle temperature and low temperature performance of different rubber materials or different formulas can be measured.

Salt spray corrosion test apparatus is aimed at the surface treatment of various materials. It contains hardware electroplating, hardware, electronic parts, chemical coatings, baking paint, cars, motorcycles, hardware cleaning tools, screws, springs...

When the building partition is subjected to the fire resistance test according to the fire resistance test method specified in ISO 834-1, the water spray impact test shall be additionally carried out as required.

Thermal Stability Test Apparatus Comply with IEC 60811-3-2: 1985 test standard requirements.It is applicable to the insulation and sheath test of polyvinyl chloride compound for wire and cable.

This Extrusion Test Apparatus Comply with UL758-2016,Suitable for 20AWG~14AWG insulated wire anti-extrusion test.

This Bending Test Machine is suitable for lining fire hose and fire hose bendability test and fire hose test with hose specifications of 25, 40, 50, 65, 80 and 100. 

Fire Retardant Paint Test Apparatus Under specified conditions, it is a test method for testing the flame resistance characteristics of decorative fire retardant paint applied to the surface of flammable substrates.

Comply with ISO 7165 and ISO 11601 standard,It is suitable for electrical insulation performance test of water-based fire extinguisher when spraying.

This Testing equipment Comply with DIN 14521-1987 standards ,it is suitable for the sealing performance, pressure resistance performance, outer diameter expansion rate and axial elongation rate test of fire hose reels of water, dry powder and foam fire extinguishing agents.

It is suitable for spray gun drop test. Hang the spray gun on the test stand, drop it from a height of 1.5m, and impact it on a 10cm-thick reinforced concrete board. After the test, the spray gun should be free of cracking and deformation and can be used normally.

 It is suitable for evaluating the performance of rail train materials such as single or composite rigid materials, materials with adhesive coating, and flexible materials with a thickness greater than 5 mm.

This Fire Resistance Test Machine Equipment Complies with UIC 564-2 standards,It is suitable for the test of fire resistance of rigid thermoplastic materials and flooring cloth (rubber, PVC, linoleum, etc.).