test apparatus

Fire Retardant Paint Test Apparatus Under specified conditions, it is a test method for testing the flame resistance characteristics of decorative fire retardant paint applied to the surface of flammable substrates.

It can perform tests on national or international standards such as ISO, ASTM, BS, DIN, JIS, etc.It can test the physical properties of various materials, finished products and semi-finished products, and can choose various fixtures for tensile, compressive, tensile, compressive, bending, tearing, peeling, adhesion, shearing and other tests ( Optional functions, additional fees).

Fire Nozzles Jet Test Device is suitable for range test, flow test, spray angle and bloom angle measurement in the spray performance of fire water gun;

Comply with ISO 7165 and ISO 11601 standard,It is suitable for electrical insulation performance test of water-based fire extinguisher when spraying.

 It is suitable for the electrical insulation performance test of powder extinguishing agent, and the electrical insulation is ≥5kv.

Impact Testing Machine Comply with Section 1400 of UL1581-2016 and Section 7.13.2 of UL2556-2015 and Figure 16.Applicable to the verification of the impact resistance of insulation and/or covering wires and cables when struck by a free-falling weight.

It meets the requirements of  ASTM D2863, BS ISO 4589-2, NES 714,It's suitable for evaluating the combustion performance of materials such as solid, laminated, foams, soft flakes and thin films under specified environments.

It is suitable for spray gun drop test. Hang the spray gun on the test stand, drop it from a height of 1.5m, and impact it on a 10cm-thick reinforced concrete board. After the test, the spray gun should be free of cracking and deformation and can be used normally.

This Combustion Testing Equipment suitable for the non-prolonged combustion performance of aviation and aerospace wires and cables under the direct combustion of the specified fire source.

Flame Retardant Test Apparatus is used to test the flame retardant properties of hanging fabrics such as curtains. NFPA 701:2004 Test Method "Standard methods of fire tests for flame propagation of textiles and films".

Comply with ISO 5658-2 standards,It is suitable for testing the surface characteristics of flat single materials, composite materials or components used on exposed surfaces of buildings and transportation vehicles (such as ships, trains, etc.), and tubular products through special installation and fixing.

Burn-Through Test Apparatus Compliant standards:US Federal Aviation Regulations FAR25,suitable for evaluating the burn-through resistance of thermal and acoustic insulation materials under high-intensity open flames.

This Combustion Tester Equipment Comply with ISO 1716-2002 standards,The test of determination of the heat of combustion of building products at constant volume in a bomb calorimeter including gross heat and net heat of combustion.

Comply with the test standard of ISO 9239 and ASTM E648,This test method is applicable to all kinds of flooring materials,Such as: textile carpet, soft wooden board, wood board, rubber board and plastic floor and floor spraying material. 

This Fire Resistance Test Machine Equipment Complies with UIC 564-2 standards,It is suitable for the test of fire resistance of rigid thermoplastic materials and flooring cloth (rubber, PVC, linoleum, etc.).