This Cone Calorimeter Standard：Complies with: GB/T16172, ISO 5660-1 and -2, ASTM E1354, ASTM E 1740, ASTM E1550, ASTM D5485, ASTM D6113, NFPA 271, NFPA 264, CAN ULC 135, BS 476 test standard。
Cone Calorimeter Comply with ISO 9705,ISO 5660 standards,It is suitable for buildings and large complexes (including rolling stock, vehicles, warehouses and the way they are constructed) as well as for extensive fire performance test verification of raw materials, buildings and solid models.
This NBS Smoke Density Chamber Compliant with BS EN ISO5659-2:2006,ASTM E 662:2006,ISO5659-2:2012 standards,It is suitable for the determination of specific optical density of smoke produced by solid materials or assemblies in flameless mode or flame mode.
This Testing equipment Comply with DIN 14521-1987 standards ,it is suitable for the sealing performance, pressure resistance performance, outer diameter expansion rate and axial elongation rate test of fire hose reels of water, dry powder and foam fire extinguishing agents.
Comply with ISO 4589-2:1996 "Plastics—Determination of Burning behaviour by oxygen index — Part 2: Ambient-temperature test" and JIS 7201, BS 2782, ANSI/ASTM D2863, NES 714 test standards.
It is suitable for fire emergency lighting and evacuation indication systems installed in general industrial and civil buildings, as well as system lights with special performance installed in other environments.
It is suitable for fire coupling, fire water gun sealing performance and water pressure strength test.
High temperature resistance test of fire-fighting smoke exhaust ventilator: It is suitable for axial flow (corresponding centrifugal type) fire-fighting smoke exhaust ventilator of machine number N0.3 to N0.18 to carry out high temperature resistance test in the laboratory;
It is suitable for fire-fighting soft reel and fire-fighting water gun spray test.This equipment only includes fire hose reel jet test, fire water gun jet test and flow test;
This Combustion Tester Equipment Comply with ISO 1716-2002 standards,The test of determination of the heat of combustion of building products at constant volume in a bomb calorimeter including gross heat and net heat of combustion.
Smoke Density Chamber is used to measure the density of smoke released when cables and optical cables are burned under specific conditions.Compliance with IEC 61034.
This Material Smoke Toxicity Hazard Classification Tester Comply with DIN 14521-1987、ISO19700-2006 standards,It is suitable for the test equipment for the grading of smoke toxicity hazard for materials that produce smoke stably.
It is used to measure the total amount of halogen acid gas in low-halogen and halogen-free flame retardant cables and measure the acidity of the gas by measuring PH value and conductivity.
Comply with EN 50305,EN 45545,DIN 14521 standards,It is suitable for non-metallic material toxicity index test of halogen-free, low-smoke, and low-toxicity wires, cables or optical cables.
It meets the requirements of ASTM D2863, BS ISO 4589-2, NES 714,It's suitable for evaluating the combustion performance of materials such as solid, laminated, foams, soft flakes and thin films under specified environments.
WhatsApp:
Mobile Phone:
Contact Now
