flame propagation

The Flame Propagation Test Apparatus Comply with IEC60332-1-1:2004 and IEC60332-1-2:2004 standard,It is suitable for measuring the non-continued burning after extinction of burner performance of single plastic wire, control, cross-linking, elevator, marine, mining cable, etc.

 Flame Propagation Apparatus (FPA) measures the combustion characteristics of materials. The main measurement parameters are ignition time (Tign), mass loss rate (m), chemical (Qchem) heat release rate, convective (Qc) heat release rate, effective heat of combustion (EHC), and smoke generation rate. 

this machine Conform to ASTM D3806 standard Applicable to the determination of flame propagation performance of decorative fire retardant paints.

Comply with ASTM E162,ASTM D3675 standards, It is suitable for evaluating the performance of rail train materials such as single or composite rigid materials, materials with adhesive coating, and flexible materials with a thickness greater than 5 mm.

Flame Retardant Test Apparatus is used to test the flame retardant properties of hanging fabrics such as curtains. NFPA 701:2004 Test Method "Standard methods of fire tests for flame propagation of textiles and films".

 It is suitable for evaluating the performance of rail train materials such as single or composite rigid materials, materials with adhesive coating, and flexible materials with a thickness greater than 5 mm.

Comply with the test standard of ISO 9239 and ASTM E648,This test method is applicable to all kinds of flooring materials,Such as: textile carpet, soft wooden board, wood board, rubber board and plastic floor and floor spraying material.