smoke

ISO 19700 Smoke density testers are used to determine the fire resistance and smoke-generating characteristics of materials such as plastics, rubber, textiles, and other materials.

Smoke Density Chamber is used to measure the density of smoke released when cables and optical cables are burned under specific conditions.Compliance with IEC 61034.

It is an independent smoke alarm fire detection, a dot-type fireworks detector, and is suitable for various functional detection of alarm device installed in civil buildings. 

It is suitable for the toxicity analysis of any combustion product, and can be used in conjunction with smoke-producing toxicity tester, NBS smoke density tester, hammer calorimeter, toxicity test chamber (tubular distillation method) and other instruments

Comply with the standard requirements of ISO19700-2006,It is suitable for the test equipment for the grading of smoke toxicity hazard for materials that produce smoke stably.

This NBS Smoke Density Chamber Compliant with BS EN ISO5659-2:2006,ASTM E 662:2006,ISO5659-2:2012 standards,It is suitable for the determination of specific optical density of smoke produced by solid materials or assemblies in flameless mode or flame mode.

This Material Smoke Toxicity Hazard Classification Tester Comply with DIN 14521-1987、ISO19700-2006 standards,It is suitable for the test equipment for the grading of smoke toxicity hazard for materials that produce smoke stably.

 Flame Propagation Apparatus (FPA) measures the combustion characteristics of materials. The main measurement parameters are ignition time (Tign), mass loss rate (m), chemical (Qchem) heat release rate, convective (Qc) heat release rate, effective heat of combustion (EHC), and smoke generation rate. 

Fire testing laboratories are specialized facilities dedicated to evaluating the performance of building materials and products under fire conditions. These laboratories conduct various fire tests, including flame spread, combustion rates, smoke generation, and material fire resistance assessments. Their goal is to ensure that building materials and products can provide necessary protection and safety in the event of a fire, reducing the potential impact on individuals and properties.

This Smoke Density Chamber Compliant with BS EN ISO 5659, ASTM E662 standards,It is suitable for the determination of specific optical density of smoke produced by solid materials or assemblies in flameless mode or flame mode.