Fire Resistance Test Equipment For Mattress & Sofa

Compliant standards:

Comply with the standard requirements of GB17927.1~2-2011 "Upholstered Furniture—Assessment of the resistance to ignition of mattress and sofa—Part 1 - Smoldering Cigarette";

Comply with the standard requirements of ISO 8191.1:1988 "Furniture—Assessment of the ignitability of upholstered furniture—Part 1: ignition source: smouldering cigarette";

Compliant with GB17927.2-2011 "Upholstered Furniture—Assessment of the resistance to ignition of mattress and sofa—Part 2 - Match flame equivalent"

Comply with the standard requirements of GB17927.1~2-2011 "Upholstered Furniture—Assessment of the resistance to ignition of mattress and sofa—Part 2 - Match flame equivalent";

Comply with the requirements of BS 5852-2006 "Methods of test for assessment of  the ignitability of upholstered seating by smouldering and flaming ignition sources".

Main parameters:

Composition of test equipment:

test box, test apparatus, test platform, smoldering (lit cigarette), butane burner, wood stack ignition source, and ignition source control part;

Test box (the Tenderer provides test room)

The burning chamber is with ventilation facilities. The airflow rate around the test bench provided by the supply and exhaust system is 0.02m/S~0.2m/s, which contains enough oxygen and does not interfere with the burning test.

Laboratory specifications: length 2.2m, width 2.5m, height 3.7m, the upper part is the cone-shaped smoke exhaust part and is equipped with a frequency converter to adjust the exhaust wind speed;

Material: It is composed of three layers. The inner is stainless steel, the outer is high-temperature electrostatic baking paint, and the middle is asbestos layer for heat insulation;

There is an air inlet at the bottom of the front of the test box;

There is a door with observation window in front. The height of the door is 1.8m and the width is 0.8m.

The diagonal length of the steel mesh is 28mm. 

Cigarette ignition source apparatus & Matches flame device and its control part (for reference only)